• Charger Split Disk
  • With zero room for a pin a in the center of the disk, the Charger split disk connection is now stronger than ever. A small notch in the rear split disk allows for the Chargers easy to use lever to lock you into place.
• Step 1
  • Pull the lever up in the rear baseplate and position the baseplate over the disk at a 90* angle, the lever should align with with the two reference points on the disk. Push the baseplate down onto the disk.
• Step 2
  • Turn the baseplate counterclockwise until it stops.The bindings rotatoin will help to pull the two halves of the splitboard together allowing for the best possible splitboard connection.
• Step 3
  • Push the lever down to lock the binding into place. You're now ready to strap in and enjoy the ride down.
• Charger Touring Bracket
  • No pins needed. The Charger Touring Bracket is the future of Union Binding splitboard technology. Simple, easy to use, and incredibly light weight.
• Step 1
  • Turn the baseplate vertical and align it with the bracket tips.
• Step 2
  • Slide the baseplate inwards until you feel it stop. Be sure to push the baseplate fully into place before pushing down. The baseplate will only release at a full 90* angle.
• Step 3
  • You're now ready to tour. For help on steep climbs, flip down the heel riser underneath the baseplate and lock securely into place.

Baseplate - SP3 Duraflex CB
Bushing - Thermoformed EVA
Heelcup - Extruded 3D Aluminum w/ Astro Washer
Highback - EXP3 Duraflex ST
Ankle Strap - Exoframe 5.0
Toe Strap - TS 4.0+
Ratchet - Magnesium S1 W/ Aluminum Base
FLAD - Split V3
Hardware - Grade 8.8 Steel
Gas Pedal - Non-Stick EVA
Strap Adjustment - Tool-Less
Canting - No
Overall Flex - 7 / 10
Suggested Board to Binding Flex - Stiff
Disk Type and Compatability - Charger Split Disk, Voile Compatible, Charger Quiver Disk, 4x2